phpmyadmin+mysql-5.6.16.tar.gz使用
Phpmyadmin的使用首先需要lamp或者是lnmp环境：
一.首先搭建phpmyadmin运行环境
现在以lamp环境为例：
安装部署lamp环境
1.安装Apache
下载安装
yum install zlib-devel -ywget http://mirror.bit.edu.cn/apache/httpd/httpd-2.2.31.tar.gztar xf httpd-2.2.31.tar.gz cd httpd-2.2.31./configure \--prefix=/application/apache2.2.31 \--enable-deflate \--enable-expires \--enable-headers \--enable-modules=most \--enable-so \--with-mpm=worker \--enable-rewritemakemake installln -s /application/apache2.2.31/ /application/apachels -l /application/2、启动服务
/application/apache/bin/apachectl start 启动时会报错，这时，在 vim httpd.conf文件中把98行改为 ServerName localhost:80，再次重启就不再提示报错了。netstat -lntup|grep httpd3、配置基于域名的虚拟主机
cd /application/apache/conf/vim httpd.conf 修改98行ServerName 127.0.0.1:80 这样修改，第一次启动时，就不提醒错误4.php快速安装
wget -O /etc/yum.repos.d/epel.repo http://mirrors.aliyun.com/repo/epel-6.repoyum install freetype-devel libjpeg-turbo-devel libpng-devel gd-devel libcurl-devel libxslt-devel libmcrypt-devel mhash mhash-devel mcrypt libxslt-devel -y yum install openssl-devel openssl -yyum install zlib libxml libjpeg freetype libpng gd curl libiconv zlib-devel libxml2-devel libjpeg-devel freetype-devel libpng-devel gd-devel curl-devel -ymkdir -p /application/toolscd /application/toolswget http://ftp.gnu.org/pub/gnu/libiconv/libiconv-1.14.tar.gztar zxvf libiconv-1.14.tar.gz cd libiconv-1.14./configure --prefix=/usr/local/libiconv make make install cd ../tar xf php-5.3.27.tar.gzcd php-5.3.27./configure \--prefix=/application/php-5.3.27 \--with-apxs2=/application/apache/bin/apxs \--with-mysql=mysqlnd \--with-xmlrpc \--with-openssl \--with-zlib \--with-freetype-dir \--with-gd \--with-jpeg-dir \--with-png-dir \--with-iconv-dir=/usr/local/libiconv \--enable-short-tags \--enable-sockets \--enable-zend-multibyte \--enable-soap \--enable-mbstring \--enable-static \--enable-gd-native-ttf \--with-curl \--with-xsl \--enable-ftp \--with-libxml-dirmakemake installln -s /application/php-5.3.27 /application/php\cp /application/tools/php-5.3.27/php.ini-production /application/php/lib/php.ini 检查apache配置文件中是否有
[root@web02 conf]# grep libphp5 /application/apache/conf/httpd.conf LoadModule php5_module modules/libphp5.so[root@web02 conf]# ll /application/apache/modules/total 28980-rw-r--r--. 1 root root 9280 Oct 29 08:09 httpd.exp-rwxr-xr-x. 1 root root 29660983 Oct 29 09:46 libphp5.so二.配置httpd.conf:apache配置文件中针对连接php的设置
vim /application/apache/conf/httpd.conf
1）98 ServerName 127.0.0.1:802）311 AddType application/x-httpd-php .php .phtmlAddType application/x-httpd-php-source .phps3)用户 (关键是统一UID，工作中web服务统一一套工具)apache和nginx的用户UID是一致的67行下增加User wwwGroup wwwuseradd www -s /sbin/nologin -M建立用户：id www4）166DirectoryIndex index.php index.html此处的MySQL是：192.168.56.42，已经编译安装好
上传phpMyAdmin-4.0.5-all-languages.tar.gz到/application/apache2.2.31/htdocs下解压 tar xf phpMyAdmin-4.0.5-all-languages.tar.gzMv phpMyAdmin-4.0.5-all-languages.tar.gz phpmyadmin 改名到此部署完成
三.演示成果
在浏览器输入：http://192.168.56.42/phpmyadmin/
此时的httpd的启动用户为www
[root@mysql-5 libraries]# lsof -i:80
COMMAND PID USER FD TYPE DEVICE SIZE/OFF NODE NAME
httpd 13442 root 4u IPv6 211012 0t0 TCP :http (LISTEN)
httpd 13444 www 4u IPv6 211012 0t0 TCP :http (LISTEN)
httpd 13445 www 4u IPv6 211012 0t0 TCP :http (LISTEN)
httpd 13446 www 4u IPv6 211012 0t0 TCP :http (LISTEN)
注意：
如果pkill httpd,
使用/etc/init.d/httpd start启动，则会导致phpmyadmin界面打不开报错404
此时查看lsof -i:80
[root@mysql-5 libraries]# lsof -i:80COMMAND PID USER FD TYPE DEVICE SIZE/OFF NODE NAMEhttpd 13381 root 4u IPv6 210479 0t0 TCP *:http (LISTEN)httpd 13383 apache 4u IPv6 210479 0t0 TCP *:http (LISTEN)httpd 13384 apache 4u IPv6 210479 0t0 TCP *:http (LISTEN)httpd 13385 apache 4u IPv6 210479 0t0 TCP *:http (LISTEN)httpd 13386 apache 4u IPv6 210479 0t0 TCP *:http (LISTEN)httpd 13387 apache 4u IPv6 210479 0t0 TCP *:http (LISTEN)httpd 13388 apache 4u IPv6 210479 0t0 TCP *:http (LISTEN)httpd 13389 apache 4u IPv6 210479 0t0 TCP *:http (LISTEN)httpd 13390 apache 4u IPv6 210479 0t0 TCP *:http (LISTEN)在192.168.56.42服务器上的MySQL服务创建登陆phpmyadmin的用户和密码mysql> grant all on *.* to phpmyadmin@'192.168.56.%' identified by '123456';
修改配置文件：这样就可以远程登陆192.168.56.0/24网段的phpmyadmin的数据库账户
/application/apache/htdocs/phpmyadmin/libraries/config.default.php[root@mysql-5 libraries]# cat -n config.default.php|sed -n '746p' 746 $cfg['AllowArbitraryServer'] = true;在MySQL服务器192.168.56.41上登录数据库操作：
mysql> select * from wjw02.t2;+----+-------------+| id | name |+----+-------------+| 1 | tomcat || 2 | fire || 4 | ball || 5 | tom || 6 | cat || 7 | gog || 8 | pig || 10 | tiger || 11 | go || 12 | booss || 13 | tomcat12 || 15 | tomcat1 || 17 | tomcat234 || 19 | tomcat34456 |+----+-------------+14 rows in set (0.01 sec)mysql> select * from wjw01.t1;+----+---------+| id | name |+----+---------+| 1 |sansan || 2 | bobo || 3 | pig || 4 | apple || 5 | ball || 6 | peer || 7 | water || 9 | tomcat |+----+---------+8 rows in set (0.00 sec)远程登陆数据库：
登陆远程的192.168.56.41上的MySQL服务，查看当前的wjw02库，t2表
192.168.56.41上登陆MySQL数据库查看表数据：
mysql> select * from wjw02.t2;+----+-------------+| id | name |+----+-------------+| 1 | tomcat || 2 | fire || 4 | ball || 5 | tom || 6 | cat || 7 | gog || 8 | pig || 10 | tiger || 11 | go || 12 | booss || 13 | tomcat12 || 15 | tomcat1 || 17 | tomcat234 || 19 | tomcat34456 |+----+-------------+14 rows in set (0.00 sec)四.报错警告提示解决方法：
[root@mysql-5 libraries]# cat -n config.default.php|sed -n '160p' 160 $cfg['Servers'][$i]['extension'] = 'mysqli';修改为：160 $cfg['Servers'][$i]['extension'] = 'mysql'
在配置文件102处添加短密码123456，就不会在提示错误了：
root@mysql-5 libraries]# cat -n config.default.php|sed -n '102p' 102 $cfg['blowfish_secret'] = '123456';五.解决缺少mcrypt扩展的问题的办法
参考网友文档：
http://blog.sina.com.cn/s/blog_4d0309640101ju0j.html
下面以CentOS 6.0系统为例来为说明
1、安装第三方yum源（默认yum源里面没有这几个库文件，不能使用yum安装）执行以下命令
wget http://www.atomicorp.com/installers/atomic
执行以下命令
sh ./atomic
2、执行以下命令来安装
yum install php-mcrypt libmcrypt libmcrypt-devel
3、重启系统执行
shutdown -r now
记得还需重启一下mysql ，大功告成 登陆phpmyadmin将不再出现缺少mcrypt扩展。请检查PHP配置！
重新启动Apache
/application/apache/bin/apachectl start
lsof -i:80
到此处问题解决
Phpmyadmin高级应用参考文档
http://yongxi.blog.51cto.com/2352775/1762609
