导航：首页 > 服务器 >

linux怎样修改网卡名字

发表于：2024-12-03 作者：千家信息网编辑

千家信息网最后更新 2024年12月03日，linux怎样修改网卡名字，针对这个问题，这篇文章详细介绍了相对应的分析和解答，希望可以帮助更多想解决这个问题的小伙伴找到更简单易行的方法。ifconfig发现网卡名字(eth2、eth3)与配置文件

千家信息网最后更新 2024年12月03日linux怎样修改网卡名字

linux怎样修改网卡名字，针对这个问题，这篇文章详细介绍了相对应的分析和解答，希望可以帮助更多想解决这个问题的小伙伴找到更简单易行的方法。

ifconfig发现网卡名字(eth2、eth3)与配置文件中名字(eth0、eth2)不符，修改如下
一、查看网卡名字对应的HWADDR
[root@linnux ~]# ifconfig -a
eth2 Link encap:Ethernet HWaddr 08:00:27:14:87:06
inet addr:192.168.1.2 Bcast:192.168.1.255 Mask:255.255.255.0
inet6 addr: fe80::a00:27ff:fe14:8706/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:658 errors:0 dropped:0 overruns:0 frame:0
TX packets:527 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:65027 (63.5 KiB) TX bytes:78666 (76.8 KiB)

eth3 Link encap:Ethernet HWaddr 08:00:27:3E:94:DC
inet addr:172.168.1.2 Bcast:172.168.1.255 Mask:255.255.255.0
inet6 addr: fe80::a00:27ff:fe3e:94dc/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:35 errors:0 dropped:0 overruns:0 frame:0
TX packets:37 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:5599 (5.4 KiB) TX bytes:7155 (6.9 KiB)

二、编辑ifcfg-eth0文件和ifcfg-eth2文件，把MAC改为正确的，把UUID删掉
[root@node1 ~]# cat /etc/sysconfig/network-scripts/ifcfg-eth0
TYPE=Ethernet
BOOTPROTO=none
IPADDR=192.168.1.2
PREFIX=24
GATEWAY=192.168.1.1
DEFROUTE=yes
IPV4_FAILURE_FATAL=yes
IPV6INIT=no
NAME="eth0"
#UUID=1976d3c7-b6fa-4002-8738-f370de6eddd6
ONBOOT=yes
HWADDR=08:00:27:14:87:06
LAST_CONNECT=1498051708

三、查看文件70-persistent-net.rules进行修改，网卡名字要和MAC地址对应
[root@node1 ~]# cat /etc/udev/rules.d/70-persistent-net.rules
# This file was automatically generated by the /lib/udev/write_net_rules
# program, run by the persistent-net-generator.rules rules file.
#
# You can modify it, as long as you keep each rule on a single
# line, and change only the value of the NAME= key.

# PCI device 0x8086:0x100e (e1000)
#SUBSYSTEM=="net", ACTION=="add", DRIVERS=="?*", ATTR{address}=="08:00:27:41:05:c4", ATTR{type}=="1" , KERNEL=="eth*", NAME="eth0"

# PCI device 0x8086:0x100e (e1000)
SUBSYSTEM=="net", ACTION=="add", DRIVERS=="?*", ATTR{address}=="08:00:27:14:87:06", ATTR{type}=="1", KERNEL=="eth*", NAME="eth0"

# PCI device 0x8086:0x100e (e1000)
SUBSYSTEM=="net", ACTION=="add", DRIVERS=="?*", ATTR{address}=="08:00:27:3e:94:dc", ATTR{type}=="1", KERNEL=="eth*", NAME="eth2"

四、查看hostname是否正确
[root@node1 ~]# cat /etc/sysconfig/network
NETWORKING=yes
HOSTNAME=node1