导航：首页 > 开发技术 >

Centos环境怎么安装lamp-php

发表于：2024-11-16 作者：千家信息网编辑

千家信息网最后更新 2024年11月16日，这篇文章主要讲解了"Centos环境怎么安装lamp-php"，文中的讲解内容简单清晰，易于学习与理解，下面请大家跟着小编的思路慢慢深入，一起来研究和学习"Centos环境怎么安装lamp-php"吧

千家信息网最后更新 2024年11月16日Centos环境怎么安装lamp-php

这篇文章主要讲解了"Centos环境怎么安装lamp-php"，文中的讲解内容简单清晰，易于学习与理解，下面请大家跟着小编的思路慢慢深入，一起来研究和学习"Centos环境怎么安装lamp-php"吧！

一. 环境准备

桥接模式

能访问外网

#ping www.baidu.com

ping得通则能到外网

关闭防火墙

#systemctl disable firewalld //禁用防火墙#systemctl stop firewalld    //关闭防火墙

关闭selinux

#vim /etc/selinux/config

改为：

selinux=disabled

配置yum源

# cd /etc/yum.repos.d/# mkdir repo_bak      //创建备份源文件夹# mv *.repo repo_bak/    //将源文件都放到备份文件夹# wget http://mirrors.aliyun.com/repo/centos-7.repo     //配置阿里源# wget http://mirrors.163.com/.help/centos7-base-163.repo //配置网易源# ls        //列出/etc/yum.repos.d/目录下的文件centos-7.repo centos-base-163.repo repo.bak# yum clean all         //清除系统所有yum缓存# yum makecache         //生成yum缓存# yum list | grep epel-release     //查看epel源列表# yum install -y epel-release     //安装epel源# ls         //epel源安装成功，比原来多了一个epel.repo和epel-testing.repo文件centos-7.repo centos-base-163.repo epel.repo epel-testing.repo repo.bak# wget -o /etc/yum.repos.d/epel-7.repo http://mirrors.aliyun.com/repo/epel-7.repo         //下载阿里源的epel源# lscentos7-base-163.repo centos-7.repo epel-7.repo epel.repo epel-testing.repo repo_bak# yum clean all        //再次清除系统yum缓存# yum makecache        //重新生成新的yum缓存# yum repolist enabled        //查看系统可用的yum源# yum repolist all            //查看所有yum源

删除旧版本

# yum -y remove php

二. apache

1. 安装apache

# yum install httpd

2. 配置apache

# vim /etc/httpd/conf/httpd.conf//搜索# addtype application/x-gzip .gz .tgz//然后在后面添加# addtype application/x-httpd-php .php//搜索# ifmodule dir_module//在directoryindex下面添加  index.php//修改#servername www.example.com:80# servername localhost:80

修改默认web站点目录

找到： documentroot "/var/www/html"
修改为： documentroot "/var/www"

找到：
修改为：

3. 启动apache服务

# systemctl start httpd

4. 查看httpd状态

systemctl status httpd

三. php 7.0.7

1. 下载好对应版本的centos的php源码包

php-7.0.7.tar.gz

2. 解压源码包

# tar zxvf php-7.0.7.tar.gz

3. 进入解压包编译安装php所需要的依赖包

# yum install -y gcc gcc-c++ make automake autoconf gd file bison patch mlocate flex diffutils zlib zlib-devel pcre pcre-devel libjpeg libjpeg-devel libpng libpng-devel freetype freetype-devel libxml2 libxml2-devel glibc glibc-devel glib2 glib2-devel bzip2 bzip2-devel ncurses ncurses-devel curl curl-devel libcurl libcurl-devel e2fsprogs e2fsprogs-devel krb5 krb5-devel openssl openssl-devel openldap openldap-devel nss_ldap openldap-clients openldap-servers openldap-devellibxslt-devel kernel-devel libtool-libs readline-devel gettext-devel libcap-devel php-mcrypt libmcrypt libmcrypt-devel recode-devel gmp-devel icu libxslt libxslt-devel php-devel# yum -y install libxslt-devel*# yum -y install perl*# yum -y install httpd-devel# find / -name apxs //得到的路径是:/usr/bin/apxs 编译参数的时候用到，是配置apache支持php的关键参数

4. 编译参数

./configure \
--prefix=/usr/local/php \
--with-config-file-path=/usr/local/php/etc \
--with-zlib-dir \
--with-freetype-dir \
--enable-mbstring \
--with-libxml-dir=/usr \
--enable-xmlreader \
--enable-xmlwriter \
--enable-soap \
--enable-calendar \
--with-curl \
--with-zlib \
--with-gd \
--with-pdo-sqlite \
--with-pdo-mysql \
--with-mysqli \
--with-mysql-sock \
--enable-mysqlnd \
--disable-rpath \
--enable-inline-optimization \
--with-bz2 \
--with-zlib \
--enable-sockets \
--enable-sysvsem \
--enable-sysvshm \
--enable-pcntl \
--enable-mbregex \
--enable-exif \
--enable-bcmath \
--with-mhash \
--enable-zip \
--with-pcre-regex \
--with-jpeg-dir=/usr \
--with-png-dir=/usr \
--with-openssl \
--enable-ftp \
--with-kerberos \
--with-gettext \
--with-xmlrpc \
--with-xsl \
--enable-fpm \
--with-fpm-user=php-fpm \
--with-fpm-group=php-fpm \
--with-fpm-systemd \
--with-apsx2 \
--disable-fileinfo

6. 编译并安装

# make && make install

7. 安装完查看php版本

# /usr/local/php/bin/php -v

8. 编辑 /etc/profil 添加环境变量

# vim /etc/profil

添加进去

path=$path:/usr/local/php/binexport path

9. 更新环境变量

# source /etc/profile

10. 查看环境变量

# echo $path

11. 查看php版本

# php -v

12. 配置php配置文件php-fpm

# cp php.ini-production /etc/php.ini# cp /usr/local/php/etc/php-fpm.conf.default /usr/local/php/etc/php-fpm.conf# cp /usr/local/php/etc/php-fpm.d/www.conf.default /usr/local/php/etc/php-fpm.d/www.conf# cp sapi/fpm/init.d.php-fpm /etc/init.d/php-fpm# chmod +x /etc/init.d/php-fpm# vim /usr/local/php/etc/php-fpm.conf# 配置错误日志:## error_log = /usr/local/php/var/php-fpm.log## 配置pid文件:## pid = /usr/local/php/var/run/php-fpm.pid## 保存退出# cd /usr/local/src/php-7.2.4# cp ./sapi/fpm/php-fpm.service 到 /usr/lib/systemd/system/下

13. 启动php-fpm

配置开机启动php-fpm:

# systemctl enable php-fpm

启动php-fpm

# systemctl start php-fpm

查看状态

# systemctl status php-fpm● php-fpm.service - the php fastcgi process managerloaded: error (reason: invalid argument)active: inactive (dead)dec 13 14:37:27 localhost.localdomain systemd[1]: [/usr/lib/systemd/system/php-fpm.service:7] not an absolute path, ignoring: ${prefix}/va…fpm.piddec 13 14:37:27 localhost.localdomain systemd[1]: [/usr/lib/systemd/system/php-fpm.service:8] executable path is not absolute, ignoring: $…pm.confdec 13 14:37:27 localhost.localdomain systemd[1]: php-fpm.service lacks both execstart= and execstop= setting. refusing.dec 13 14:37:27 localhost.localdomain systemd[1]: cannot add dependency job for unit php-fpm.service, ignoring: unit is not loaded properl…gument.hint: some lines were ellipsized, use -l to show in full.

14. 测试php-fpm的配置

#测试php-fpm配置/usr/local/php/sbin/php-fpm -t/usr/local/php/sbin/php-fpm -c /usr/local/php/etc/php.ini -y /usr/local/php/etc/php-fpm.conf -t#启动php-fpm/usr/local/php/sbin/php-fpm/usr/local/php/sbin/php-fpm -c /usr/local/php/etc/php.ini -y /usr/local/php/etc/php-fpm.conf#关闭php-fpmkill -int `cat /usr/local/php/var/run/php-fpm.pid`#重启php-fpmkill -usr2 `cat /usr/local/php/var/run/php-fpm.pid`

15. 解决办法

# vim /usr/lib/systemd/system/php-fpm.service

将其中的${prefix}和${exec_prefix}改成/usr/local/php然后保存

//重新启动系统# reboot

16. 重启apache和php-fpm

# systcl restart httpd# systcl restart php-fpm

17. 安装对应的xdebug

#复制phpinfo.php整个网页内容,粘贴到https://xdebug.org/wizard.php 确定xdebug版本

根据提示文档进行操作安装

18. yum安装phpmyadmin

# yum install phpmyadmin

修改配置文件

# vi /etc/httpd/conf.d/phpmyadmin.conf

  adddefaultcharset utf-8     # apache 2.4      # require ip 127.0.0.1 #注释掉   # require ip ::1  #注释掉   require all granted  #新添加        # apache 2.2   order deny,allow   deny from all   allow from 127.0.0.1   allow from ::1       # apache 2.4      #require ip 127.0.0.1 #注释掉   #require ip ::1  #注释掉   require all granted  #新添加          # apache 2.2   order deny,allow   deny from all   allow from 127.0.0.1   allow from ::1

修改phpmyadmin配置文件

# vi /etc/phpmyadmin/config.inc.php//修改如下内容# $cfg['servers'][$i]['host'] = '127.0.0.1';# $cfg['servers'][$i]['user'] = 'root';# $cfg['servers'][$i]['password'] = '123456';

重启apache

# systemctl restart httpd

安装完mysql后测试

# 浏览器地址栏输入: 服务器ip/phpmyadmin

四. 安装mysql 5.7

1. 安装源

# rpm -uvh https://dev.mysql.com/get/mysql57-community-release-el7-11.noarch.rpm

2. yum安装mysql

# yum install mysql-community-server

3. 启动mysql

# systemctl start mysqld# systemctl enable mysqld //开机自启

4. 在更改root默认密码前，可以根据需要，关闭密码策略。如果没有关闭密码策略，则新密码要求是大小写字母+数字+字符的组合。

# vim /etc/my.cnf[mysqld]validate_password = off//重启，使修改后的密码策略生效# systemctl restart mysqld

5. 修改mysql的root默认密码

//查看默认密码# grep 'temporary password' /var/log/mysqld.log//默认密码是： )u4fb:kw!evf# 2018-12-18 a temporary password is generated for root@localhost: )u4fb:kw!evf

运行安全设置向导，并修改默认密码

mysql_secure_installation//输入root默认密码enter password for user root: ***//设置新密码new password:***re-enter new password: ***//是否更改root密码change the password for root ? ((press y|y for yes, any other key for no) ://直接回车，表示no//是否删除匿名用户remove anonymous users? (press y|y for yes, any other key for no) : y//禁止root远程登录disallow root login remotely? (press y|y for yes, any other key for no) : y//删除test数据库remove test database and access to it? (press y|y for yes, any other key for no) : y//重新加载权限表reload privilege tables now? (press y|y for yes, any other key for no) : y

//也可以使用mysql直接更改root密码mysql -uroot -palter user 'root'@'localhost' identified by '新密码';exit;

//为安全root仅限本地登录，根据需要可以新建一个有管理员权限的远程用户mysql -uroot -pgrant all privileges on *.* to '用户名'@'%' identified by '登录密码' with grant option;flush privileges;exit;

感谢各位的阅读，以上就是"Centos环境怎么安装lamp-php"的内容了，经过本文的学习后，相信大家对Centos环境怎么安装lamp-php这一问题有了更深刻的体会，具体使用情况还需要大家实践验证。这里是，小编将为大家推送更多相关知识点的文章，欢迎关注！

很赞哦！