Ubuntu16.04怎么搭建php5.6Web服务器环境
发表于:2024-11-30 作者:千家信息网编辑
千家信息网最后更新 2024年11月30日,这篇文章将为大家详细讲解有关Ubuntu16.04怎么搭建php5.6Web服务器环境,小编觉得挺实用的,因此分享给大家做个参考,希望大家阅读完这篇文章后可以有所收获。Ubuntu 16.04默认安装
千家信息网最后更新 2024年11月30日Ubuntu16.04怎么搭建php5.6Web服务器环境
这篇文章将为大家详细讲解有关Ubuntu16.04怎么搭建php5.6Web服务器环境,小编觉得挺实用的,因此分享给大家做个参考,希望大家阅读完这篇文章后可以有所收获。
Ubuntu 16.04默认安装php7.0环境,但是php7目前对某些旧系统的兼容性并不是很好,如果自行安装php5需要清除php7的已安装包,否则会报错。
移除默认及已安装的PHP包
sudo dpkg -l | grep php| awk '{print $2}' |tr "\n" " "sudo apt-get install aptitudesudo aptitude purge `dpkg -l | grep php| awk '{print $2}' |tr "\n" " "`
添加 PPA
sudo add-apt-repository ppa:ondrej/php
安装php5.6
sudo apt-get updatesudo apt-get install php5.6
安装扩展
sudo apt-get install php5.6-gdsudo apt-get install php5.6-mysql
安装Apache2
sudo apt install apache2sudo apt-get install libapache2-mod-php5.6
安装MySQL
sudo apt install mysql-server php5.6-mysql root root0x0sudo apt-get install mysql-clientmysql_secure_installation
安装 phpmyadmin
sudo apt-get install phpmyadminsudo apt-get install php5.6-mbstringsudo apt-get install php5.6-gettextsudo ln -s /usr/share/phpmyadmin /var/www/html/phpmyadmin
配置phpmyadmin
nano /etc/php/5.6/apache2/php.inidisplay_errors = On(显示错误日志,出现两次,都要改,不然无效)extension=php_mbstring.dll (开启mbstring)sudo dpkg-reconfigure phpmyadmin (重新配置phpmyadmin)
增加网站
sudo ln -s /etc/apache2/sites-available/files.conf /etc/apache2/sites-enabled/files.confsudo chown -R www-data /var/www/tianyasudo /etc/init.d/apache2 restart
添加FTP
sudo apt install vsftpduseradd -d /var/www/tianya -s /sbin/nologin myftppasswd myftpchmod 777 -R /var/www/tianyausermod -s /sbin/nologin myftpvim /etc/vsftpd.confvim /etc/vsftpd.chroot_listservice vsftpd restartservice vsftpd status# Example config file /etc/vsftpd.conf## The default compiled in settings are fairly paranoid. This sample file# loosens things up a bit, to make the ftp daemon more usable.# Please see vsftpd.conf.5 for all compiled in defaults.## READ THIS: This example file is NOT an exhaustive list of vsftpd options.# Please read the vsftpd.conf.5 manual page to get a full idea of vsftpd's# capabilities.### Run standalone? vsftpd can run either from an inetd or as a standalone# daemon started from an initscript.#userlist_enable=YES#userlist_deny=NO#userlist_file=/etc/vsftpd.user_listlisten=YES## Run standalone with IPv6?# Like the listen parameter, except vsftpd will listen on an IPv6 socket# instead of an IPv4 one. This parameter and the listen parameter are mutually# exclusive.#listen_ipv6=YES## Allow anonymous FTP? (Disabled by default)anonymous_enable=NO## Uncomment this to allow local users to log in.local_enable=YES## Uncomment this to enable any form of FTP write command.write_enable=YES## Default umask for local users is 077. You may wish to change this to 022,# if your users expect that (022 is used by most other ftpd's)local_umask=022## Uncomment this to allow the anonymous FTP user to upload files. This only# has an effect if the above global write enable is activated. Also, you will# obviously need to create a directory writable by the FTP user.#anon_upload_enable=YES## Uncomment this if you want the anonymous FTP user to be able to create# new directories.#anon_mkdir_write_enable=YES## Activate directory messages - messages given to remote users when they# go into a certain directory.dirmessage_enable=YES## If enabled, vsftpd will display directory listings with the time# in your local time zone. The default is to display GMT. The# times returned by the MDTM FTP command are also affected by this# option.use_localtime=YES## Activate logging of uploads/downloads.xferlog_enable=YES## Make sure PORT transfer connections originate from port 20 (ftp-data).connect_from_port_20=YES## If you want, you can arrange for uploaded anonymous files to be owned by# a different user. Note! Using "root" for uploaded files is not# recommended!#chown_uploads=YES#chown_username=whoever## You may override where the log file goes if you like. The default is shown# below.xferlog_file=/var/log/vsftpd.log## If you want, you can have your log file in standard ftpd xferlog format.# Note that the default log file location is /var/log/xferlog in this case.xferlog_std_format=YES## You may change the default value for timing out an idle session.#idle_session_timeout=600## You may change the default value for timing out a data connection.#data_connection_timeout=120## It is recommended that you define on your system a unique user which the# ftp server can use as a totally isolated and unprivileged user.#nopriv_user=ftpsecure## Enable this and the server will recognise asynchronous ABOR requests. Not# recommended for security (the code is non-trivial). Not enabling it,# however, may confuse older FTP clients.#async_abor_enable=YES## By default the server will pretend to allow ASCII mode but in fact ignore# the request. Turn on the below options to have the server actually do ASCII# mangling on files when in ASCII mode.# Beware that on some FTP servers, ASCII support allows a denial of service# attack (DoS) via the command "SIZE /big/file" in ASCII mode. vsftpd# predicted this attack and has always been safe, reporting the size of the# raw file.# ASCII mangling is a horrible feature of the protocol.#ascii_upload_enable=YES#ascii_download_enable=YES## You may fully customise the login banner string:ftpd_banner=Welcome to blah FTP service.## You may specify a file of disallowed anonymous e-mail addresses. Apparently# useful for combatting certain DoS attacks.#deny_email_enable=YES# (default follows)#banned_email_file=/etc/vsftpd.banned_emails## You may restrict local users to their home directories. See the FAQ for# the possible risks in this before using chroot_local_user or# chroot_list_enable below.#chroot_local_user=YES## You may specify an explicit list of local users to chroot() to their home# directory. If chroot_local_user is YES, then this list becomes a list of# users to NOT chroot().# (Warning! chroot'ing can be very dangerous. If using chroot, make sure that# the user does not have write access to the top level directory within the# chroot)chroot_local_user=YESchroot_list_enable=YES# (default follows)chroot_list_file=/etc/vsftpd.chroot_list## You may activate the "-R" option to the builtin ls. This is disabled by# default to avoid remote users being able to cause excessive I/O on large# sites. However, some broken FTP clients such as "ncftp" and "mirror" assume# the presence of the "-R" option, so there is a strong case for enabling it.#ls_recurse_enable=YES## Customization## Some of vsftpd's settings don't fit the filesystem layout by# default.## This option should be the name of a directory which is empty. Also, the# directory should not be writable by the ftp user. This directory is used# as a secure chroot() jail at times vsftpd does not require filesystem# access.secure_chroot_dir=/var/run/vsftpd/empty## This string is the name of the PAM service vsftpd will use.pam_service_name=vsftpd## This option specifies the location of the RSA certificate to use for SSL# encrypted connections.rsa_cert_file=/etc/ssl/certs/ssl-cert-snakeoil.pem# This option specifies the location of the RSA key to use for SSL# encrypted connections.rsa_private_key_file=/etc/ssl/private/ssl-cert-snakeoil.key
关于"Ubuntu16.04怎么搭建php5.6Web服务器环境"这篇文章就分享到这里了,希望以上内容可以对大家有一定的帮助,使各位可以学到更多知识,如果觉得文章不错,请把它分享出去让更多的人看到。
环境
篇文章
服务器
服务
更多
配置
不错
实用
兼容性
内容
文章
日志
知识
系统
网站
错误
会报
参考
帮助
有关
数据库的安全要保护哪些东西
数据库安全各自的含义是什么
生产安全数据库录入
数据库的安全性及管理
数据库安全策略包含哪些
海淀数据库安全审计系统
建立农村房屋安全信息数据库
易用的数据库客户端支持安全管理
连接数据库失败ssl安全错误
数据库的锁怎样保障安全
固原软件开发哪家价格实惠
保密领域网络安全
加强网络安全工作的技术保障能力
科创板网络安全龙头股有哪些
软件开发流程网上销售报告
循环数据库所有表
哪个服务器最容易遇到讲英语的人
大学软件开发妹子多不多
数据采集的方式有数据库采集
网络技术开发税率
浪潮服务器电源手册
北京同德金服网络技术有限公司
腾讯员工个人数据库
服务器怎么降温
国内科技互联网十年简史
weblogic服务器生命周期
字符串类型数据库
网站转app软件开发
如何找网络安全人士帮忙
计算机网络技术有关的网页
数据库2008强制密码过期
ps4使命召唤服务器维护
程序 指令和数据库
海南移动网络技术有限公司
易迅网络安全
服务器怎么降温
福州APK软件开发
宅加新 互联网科技整装
乐视手机刷机了无法连接服务器
电商带货软件开发怎么收费