lsof 使用问题

[PROD root@#] swlist |grep -i 10G
10GigEthr-00 B.11.31.1109 PCI-X 10 Gigabit Ethernet;Supptd HW=AB287, HW=AD385
10GigEthr-02 B.11.31.1603 PCIe 10 Gigabit Ethernet;Supptd HW=467799-B21, HW=AM225A, HW=AM232A, HW=AM233A
10GigEthr-03 B.11.31.1609 PCIe 10 GbE;Supptd HW=580151/610609/613431-B21,NC551/552/553,AT094/111/118A ----------------> 补丁PHNE_44654
10GigEthr-04 B.11.31.1303 PCIe 10 Gigabit Ethernet;Supptd HW=593715/BS668
10GigEthr-05 B.11.31.1608 PCIe 10 Gigabit Ethernet;Supptd HW=716589-001

[PROD root@#] swlist -l patch|grep PHNE_44564
PHNE_44564.LANCRA-SHLIB 1.0 Networking.LANCRA-SHLIB applied
PHNE_44564.NETMG2-RUN 1.0 Networking.NETMG2-RUN applied
# PHNE_44564 1.0 Networking commands cumulative patch
# PHNE_44564.LANCRA-SHLIB 1.0 Networking.LANCRA-SHLIB applied
# PHNE_44564.NETMG2-RUN 1.0 Networking.NETMG2-RUN applied
[PROD root@#]

如果server 10GigEthr-03 打了补丁PHNE_44654， lsof 会用不了。后续出现新补丁再修复。

解决方法一：

1. swremove PHNE_44654

解决方法二：

1. 使用lsof的时候把hpnicrecovery 功能停了，不使用lsof再开启。
/sbin/init.d/hpnicrecovery stop

/sbin/init.d/hpnicrecovery start