Exalogic Ethernet交换机配置的备份与还原方法是什么
本篇内容主要讲解"Exalogic Ethernet交换机配置的备份与还原方法是什么"，感兴趣的朋友不妨来看看。本文介绍的方法操作简单快捷，实用性强。下面就让小编来带大家学习"Exalogic Ethernet交换机配置的备份与还原方法是什么"吧!
备份
PC>ping 10.135.162.152 //先对交换机ping一下确保与交换机之间的连线是相同的
Pinging 10.135.162.152 with 32 bytes of data:
Request timed out.
Reply from 10.135.162.152: bytes=32 time=0ms TTL=255//提示ping通
Reply from 10.135.162.152: bytes=32 time=1ms TTL=255
Reply from 10.135.162.152: bytes=32 time=0ms TTL=255
Ping statistics for 10.135.162.152:
Packets: Sent = 4, Received = 3, Lost = 1 (25% loss),
Approximate round trip times in milli-seconds:
Minimum = 0ms, Maximum = 1ms, Average = 0ms
PC>telnet 10.135.162.152 //用telnet进行远程登录
Trying 10.135.162.152 ...Open
User Access Verification
Password: //输入telnet登录密码：
SW1>enable //进入交换机
Password: //输入进入密码：
SW1#copy running-config startup-config //将运行配置文件覆盖启动配置文件。（将交换机所做的配置保存下来。）
Destination filename [startup-config]? //指定目标文件[默认为startup-config]
Building configuration...
[OK]
SW1#copy running-config TFTP //将运行配置文件（交换机的配置）保存到FTP服务器上
Address or name of remote host []? 10.135.20.72 //指定远程FTP服务器的地址
Destination filename [SW1-confg]? dm01sw-adm01-config //指定保存到FTP服务器上的文件名
Writing running-config....!!
[OK - 1059 bytes]
1059 bytes copied in 3.005 secs (0 bytes/sec)
SW1#
2.还原
Switch#
Switch#config t
Enter configuration commands, one per line. End with CNTL/Z.
Switch(config)#int vlan 1 //进入VLAN1
Switch(config-if)#ip add
Switch(config-if)#ip address 192.168.1.1 255.255.255.0 //配置VLAN1IP地址
Switch(config-if)#no shutdown //启动生效
Switch(config-if)#
%LINK-5-CHANGED: Interface Vlan1, changed state to up
%LINEPROTO-5-UPDOWN: Line protocol on Interface Vlan1, changed state to up
Switch(config-if)#exit
Switch(config)#exit
Switch#
%SYS-5-CONFIG_I: Configured from console by console
Switch#copy TFTP startup-config //将FTP上的文件复制到启动配置文件中
Address or name of remote host []? 10.135.20.72 //来自FTP的地址是10.135.20.72
Source filename []? dm01sw-adm01-config //来自FTP的dm01sw-adm01-config 文件
Destination filename [startup-config]? //指定存放的目标文件为默认的startup-config
Accessing tftp://10.135.20.72/dm01sw-adm01-config....
Loading dm01sw-adm01-config from 10.135.20.72: !
[OK - 1059 bytes] //复制成功。
1059 bytes copied in 3.016 secs (351 bytes/sec)
Switch#
到此，相信大家对"Exalogic Ethernet交换机配置的备份与还原方法是什么"有了更深的了解，不妨来实际操作一番吧！这里是网站，更多相关内容可以进入相关频道进行查询，关注我们，继续学习！
