php源码安装、简单配置、测试及连接数据库

主机环境 redhat6.5 64位

实验环境 服务端 ip172.25.29.1 php

安装包 php-5.6.20.tar.bz2

re2c-0.13.5-1.el6.x86_64.rpm

libmcrypt-2.5.8-9.el6.x86_64.rpm

libmcrypt-devel-2.5.8-9.el6.x86_64.rpm

Discuz_X3.2_SC_UTF8.zip

1. 安装php

1.解压

[root@server1 mnt# tar jxf php-5.6.20.tar.bz2 #解压

[root@server1 php-5.6.20]# rpm -vih libmcrypt-* #安装libmcrypt库

[root@server1 php-5.6.20]# yum installre2c-0.13.5-1.el6.x86_64.rpm -y #安装re2c

2.软件配置

[root@server1 php-5.6.20]# ./configure --prefix=/usr/local/lnmp/php--with-config-file-path=/usr/local/lnmp/php/etc --with-openssl --with-snmp--with-gd --with-zlib --with-curl --with-libxml-dir --with-png-dir--with-jpeg-dir --with-freetype-dir --with-gettext --without-pear --with-gmp--enable-inline-optimization --enable-soap --enable-ftp --enable-sockets--enable-mbstring --with-mysqli --with-mysql --with-pdo-mysql --enable-fpm--with-fpm-user=nginx --with-fpm-group=nginx --with-mcrypt --with-mhash

如果出现如下错误

[root@server1 php-5.6.20]# yum install libxml2-devel -y

重新配置

[root@server1 php-5.6.20]# ./configure--prefix=/usr/local/lnmp/php --with-config-file-path=/usr/local/lnmp/php/etc--with-openssl --with-snmp --with-gd --with-zlib --with-curl --with-libxml-dir--with-png-dir --with-jpeg-dir --with-freetype-dir --with-gettext--without-pear --with-gmp --enable-inline-optimization --enable-soap--enable-ftp --enable-sockets --enable-mbstring --with-mysqli --with-mysql--with-pdo-mysql --enable-fpm --with-fpm-user=nginx --with-fpm-group=nginx--with-mcrypt --with-mhash

如果出现如下错误

[root@server1 php-5.6.20]# yum provides */easy.h

[root@server1 php-5.6.20]# yum install -ylibcurl-devel-7.19.7-37.el6_4.x86_64

重新配置

[root@server1 php-5.6.20]# ./configure--prefix=/usr/local/lnmp/php --with-config-file-path=/usr/local/lnmp/php/etc--with-openssl --with-snmp --with-gd --with-zlib --with-curl --with-libxml-dir--with-png-dir --with-jpeg-dir --with-freetype-dir --with-gettext--without-pear --with-gmp --enable-inline-optimization --enable-soap--enable-ftp --enable-sockets --enable-mbstring --with-mysqli --with-mysql--with-pdo-mysql --enable-fpm --with-fpm-user=nginx --with-fpm-group=nginx--with-mcrypt --with-mhash

如果出现如下错误

[root@server1 php-5.6.20]# yum provides */jpeglib.h

[root@server1 php-5.6.20]# yum install -ylibjpeg-turbo-devel-1.2.1-1.el6.x86_64

重新配置

[root@server1 php-5.6.20]# ./configure--prefix=/usr/local/lnmp/php --with-config-file-path=/usr/local/lnmp/php/etc--with-openssl --with-snmp --with-gd --with-zlib --with-curl --with-libxml-dir--with-png-dir --with-jpeg-dir --with-freetype-dir --with-gettext--without-pear --with-gmp --enable-inline-optimization --enable-soap--enable-ftp --enable-sockets --enable-mbstring --with-mysqli --with-mysql--with-pdo-mysql --enable-fpm --with-fpm-user=nginx --with-fpm-group=nginx--with-mcrypt --with-mhash

如果出现如下错误

[root@server1 php-5.6.20]# yum provides */png.h

[root@server1 php-5.6.20]# yum install -ylibpng-devel-1.2.49-1.el6_2.x86_64

重新配置

[root@server1 php-5.6.20]# ./configure--prefix=/usr/local/lnmp/php --with-config-file-path=/usr/local/lnmp/php/etc--with-openssl --with-snmp --with-gd --with-zlib --with-curl --with-libxml-dir--with-png-dir --with-jpeg-dir --with-freetype-dir --with-gettext--without-pear --with-gmp --enable-inline-optimization --enable-soap--enable-ftp --enable-sockets --enable-mbstring --with-mysqli --with-mysql--with-pdo-mysql --enable-fpm --with-fpm-user=nginx --with-fpm-group=nginx--with-mcrypt --with-mhash

如果出现如下错误

[root@server1 php-5.6.20]# yum install -y freetype-devel

重新配置

[root@server1 php-5.6.20]# ./configure--prefix=/usr/local/lnmp/php --with-config-file-path=/usr/local/lnmp/php/etc--with-openssl --with-snmp --with-gd --with-zlib --with-curl --with-libxml-dir--with-png-dir --with-jpeg-dir --with-freetype-dir --with-gettext--without-pear --with-gmp --enable-inline-optimization --enable-soap--enable-ftp --enable-sockets --enable-mbstring --with-mysqli --with-mysql--with-pdo-mysql --enable-fpm --with-fpm-user=nginx --with-fpm-group=nginx--with-mcrypt --with-mhash

如果出现如下错误

[root@server1 php-5.6.20]# yum provides */gmp.h

[root@server1 php-5.6.20]# yum install -y gmp-devel-4.3.1-7.el6_2.2.x86_64

重新配置

[root@server1 php-5.6.20]# ./configure--prefix=/usr/local/lnmp/php --with-config-file-path=/usr/local/lnmp/php/etc --with-openssl--with-snmp --with-gd --with-zlib --with-curl --with-libxml-dir --with-png-dir--with-jpeg-dir --with-freetype-dir --with-gettext --without-pear --with-gmp--enable-inline-optimization --enable-soap --enable-ftp --enable-sockets--enable-mbstring --with-mysqli --with-mysql --with-pdo-mysql --enable-fpm--with-fpm-user=nginx --with-fpm-group=nginx --with-mcrypt --with-mhash

如果出现如下错误

[root@server1 php-5.6.20]# yum install -y net-snmp-devel

重新配置

[root@server1 php-5.6.20]# ./configure--prefix=/usr/local/lnmp/php --with-config-file-path=/usr/local/lnmp/php/etc--with-openssl --with-snmp --with-gd --with-zlib --with-curl --with-libxml-dir--with-png-dir --with-jpeg-dir --with-freetype-dir --with-gettext--without-pear --with-gmp --enable-inline-optimization --enable-soap--enable-ftp --enable-sockets --enable-mbstring --with-mysqli --with-mysql--with-pdo-mysql --enable-fpm --with-fpm-user=nginx --with-fpm-group=nginx--with-mcrypt --with-mhash

3.编译、链接、安装

[root@server1 php-5.6.20]# make #编译

[root@server1 php-5.6.20]# make install #安装

2.php的简单配置

[root@server1 php-5.6.20]# cd /usr/local/lnmp/php/etc/

[root@server1 etc]# ls

php-fpm.conf.default

[root@server1 etc]# cp php-fpm.conf.default php-fpm.conf #备份php的文件

[root@server1 etc]# ls

php-fpm.conf php-fpm.conf.default

[root@server1 etc]# cp /mnt/php-5.6.20/php.ini-production php.ini #php的配置文件

[root@server1 etc]# ls

php-fpm.conf php-fpm.conf.default php.ini

如果要连接数据库，就做以下修改

[root@server1 etc]# vim php.ini

925 date.timezone = Asia/Shanghai #修改时区

1001 pdo_mysql.default_socket=/usr/local/lnmp/mysql/data/mysql.sock #指定连接数据库的sock文件的路径

1150 mysql.default_socket = /usr/local/lnmp/mysql/data/mysql.sock #同上

1209 mysqli.default_socket =/usr/local/lnmp/mysql/data/mysql.sock #同上

[root@server1 etc]# vim php-fpm.conf

25 pid = run/php-fpm.pid #将pid的标记去掉

[root@server1 etc]# cd /mnt/php-5.6.20/sapi/fpm/

[root@server1 fpm]# cp init.d.php-fpm /etc/init.d/php-fpm #添加启动命令

[root@server1 fpm]# chmod +x /etc/init.d/php-fpm #添加可执行权限

[root@server1 fpm]# ll /etc/init.d/php-fpm

-rwxr-xr-x 1 root root 2359 Sep 18 00:18 /etc/init.d/php-fpm

[root@server1 fpm]# /etc/init.d/php-fpm start #开启php服务

Starting php-fpm done

[root@server1 fpm]# cd /usr/local/lnmp/nginx/conf/

[root@server1 conf]# vim nginx.conf

51 root html;

52 index index.php index.html index.htm; #在nginx里添加默认访问目录为php优先

50 location / {

53 }

75 location ~ \.php$ {

76 root html;

77 fastcgi_pass 127.0.0.1:9000;

78 fastcgi_index index.php;

79 fastcgi_param SCRIPT_FILENAME /scripts$fastcgi_script_name;

80 include fastcgi.conf; #设置成已存在的文件

81 }

[root@server1 conf]# nginx -t #检测

[root@server1 conf]# nginx #开启

[root@server1 conf]# cd ..

[root@server1 nginx]# cd html

[root@server1 html]# vim index.php #写一个简单的测试文件

phpinfo()

?>

[root@server1 html]# /etc/init.d/httpd start #开启httpd

Starting httpd: [ OK ]

3.测试 172.25.29.1