Kubernetes Eviction Manager怎么启动

这篇文章主要讲解了"Kubernetes Eviction Manager怎么启动"，文中的讲解内容简单清晰，易于学习与理解，下面请大家跟着小编的思路慢慢深入，一起来研究和学习"Kubernetes Eviction Manager怎么启动"吧！

Kubernetes Eviction Manager源码分析

Kubernetes Eviction Manager在何处启动

Kubelet在实例化一个kubelet对象的时候，调用eviction.NewManager新建了一个evictionManager对象。

pkg/kubelet/kubelet.go:273func NewMainKubelet(kubeCfg *componentconfig.KubeletConfiguration, kubeDeps *KubeletDeps, standaloneMode bool) (*Kubelet, error) {        ...        thresholds, err := eviction.ParseThresholdConfig(kubeCfg.EvictionHard, kubeCfg.EvictionSoft, kubeCfg.EvictionSoftGracePeriod, kubeCfg.EvictionMinimumReclaim)        if err != nil {                return nil, err        }        evictionConfig := eviction.Config{                PressureTransitionPeriod: kubeCfg.EvictionPressureTransitionPeriod.Duration,                MaxPodGracePeriodSeconds: int64(kubeCfg.EvictionMaxPodGracePeriod),                Thresholds:               thresholds,                KernelMemcgNotification:  kubeCfg.ExperimentalKernelMemcgNotification,        }        ...        // setup eviction manager        evictionManager, evictionAdmitHandler, err := eviction.NewManager(klet.resourceAnalyzer, evictionConfig, killPodNow(klet.podWorkers, kubeDeps.Recorder), klet.imageManager, kubeDeps.Recorder, nodeRef, klet.clock)                if err != nil {                return nil, fmt.Errorf("failed to initialize eviction manager: %v", err)        }        klet.evictionManager = evictionManager        klet.admitHandlers.AddPodAdmitHandler(evictionAdmitHandler)        ...}

kubelet执行Run方法开始工作时，启动了一个goroutine，每5s执行一次updateRuntimeUp。在updateRuntimeUp中，待确认runtime启动成功后，会调用initializeRuntimeDependentModules完成runtime依赖模块的初始化工作。

pkg/kubelet/kubelet.go:1219func (kl *Kubelet) Run(updates <-chan kubetypes.PodUpdate) {        go wait.Until(kl.updateRuntimeUp, 5*time.Second, wait.NeverStop)}pkg/kubelet/kubelet.go:2040func (kl *Kubelet) updateRuntimeUp() {        ...                kl.oneTimeInitializer.Do(kl.initializeRuntimeDependentModules)                ...}

再跟踪到initializeRuntimeDependentModules的代码可见，runtime的依赖模块包括cadvisor和evictionManager，初始化的工作其实就是分别调用它们的Start方法进行启动。

pkg/kubelet/kubelet.go:1206func (kl *Kubelet) initializeRuntimeDependentModules() {        if err := kl.cadvisor.Start(); err != nil {                // Fail kubelet and rely on the babysitter to retry starting kubelet.                // TODO(random-liu): Add backoff logic in the babysitter                glog.Fatalf("Failed to start cAdvisor %v", err)        }        // eviction manager must start after cadvisor because it needs to know if the container runtime has a dedicated imagefs        if err := kl.evictionManager.Start(kl, kl.getActivePods, evictionMonitoringPeriod); err != nil {                kl.runtimeState.setInternalError(fmt.Errorf("failed to start eviction manager %v", err))        }}

因此，从这里开始就进入到evictionManager的分析了。

Kubernetes Eviction Manager的定义

从上面的分析可见，kubelet在启动过程中进行runtime依赖模块的初始化过程中，将evictionManager启动了。先别急，我们必须先来看看Eviction Manager是如何定义的。

pkg/kubelet/eviction/eviction_manager.go:40// managerImpl implements Managertype managerImpl struct {        //  used to track time        clock clock.Clock        // config is how the manager is configured        config Config        // the function to invoke to kill a pod        killPodFunc KillPodFunc        // the interface that knows how to do image gc        imageGC ImageGC        // protects access to internal state        sync.RWMutex        // node conditions are the set of conditions present        nodeConditions []v1.NodeConditionType        // captures when a node condition was last observed based on a threshold being met        nodeConditionsLastObservedAt nodeConditionsObservedAt        // nodeRef is a reference to the node        nodeRef *v1.ObjectReference        // used to record events about the node        recorder record.EventRecorder        // used to measure usage stats on system        summaryProvider stats.SummaryProvider        // records when a threshold was first observed        thresholdsFirstObservedAt thresholdsObservedAt        // records the set of thresholds that have been met (including graceperiod) but not yet resolved        thresholdsMet []Threshold        // resourceToRankFunc maps a resource to ranking function for that resource.        resourceToRankFunc map[v1.ResourceName]rankFunc        // resourceToNodeReclaimFuncs maps a resource to an ordered list of functions that know how to reclaim that resource.        resourceToNodeReclaimFuncs map[v1.ResourceName]nodeReclaimFuncs        // last observations from synchronize        lastObservations signalObservations        // notifiersInitialized indicates if the threshold notifiers have been initialized (i.e. synchronize() has been called once)        notifiersInitialized bool}

managerImpl就是evictionManager的具体定义，重点关注：

• config - evictionManager的配置，包括:

• PressureTransitionPeriod( --eviction-pressure-transition-period)

• MaxPodGracePeriodSeconds(--eviction-max-pod-grace-period)

• Thresholds(--eviction-hard, --eviction-soft)

• KernelMemcgNotification(--experimental-kernel-memcg-notification)

• killPodFunc - evict pod时kill pod的接口，kubelet NewManager的时候，赋值为killPodNow方法(pkg/kubelet/pod_workers.go:285)

• imageGC - 当node出现diskPressure condition时，imageGC进行unused images删除操作以回收disk space。

• summaryProvider - 提供node和node上所有pods的最新status数据汇总，既NodeStats and []PodStats。

• thresholdsFirstObservedAt - 记录threshold第一次观察到的时间。

• thresholdsMet - 保存已经触发但还没解决的Thresholds，包括那些处于grace period等待阶段的Thresholds。

• resourceToRankFunc - 定义各种Resource进行evict 挑选时的排名方法。

• resourceToNodeReclaimFuncs - 定义各种Resource进行回收时调用的方法。

• lastObservations - 上一次获取的eviction signal的记录，确保每次更新thresholds时都是按照正确的时间序列进行。

• notifierInitialized - bool值，表示threshold notifier是否已经初始化，以确定是否可以利用kernel memcg notification功能来提高evict的响应速度。目前创建manager时该值为false，是否要利用kernel memcg notification，完全取决于kubelet的--experimental-kernel-memcg-notification参数。

kubelet在NewMainKubelet时调用eviction.NewManager进行evictionManager的创建，eviction.NewManager的代码很简单，就是赋值。

pkg/kubelet/eviction/eviction_manager.go:79// NewManager returns a configured Manager and an associated admission handler to enforce eviction configuration.func NewManager(        summaryProvider stats.SummaryProvider,        config Config,        killPodFunc KillPodFunc,        imageGC ImageGC,        recorder record.EventRecorder,        nodeRef *v1.ObjectReference,        clock clock.Clock) (Manager, lifecycle.PodAdmitHandler, error) {        manager := &managerImpl{                clock:           clock,                killPodFunc:     killPodFunc,                imageGC:         imageGC,                config:          config,                recorder:        recorder,                summaryProvider: summaryProvider,                nodeRef:         nodeRef,                nodeConditionsLastObservedAt: nodeConditionsObservedAt{},                thresholdsFirstObservedAt:    thresholdsObservedAt{},        }        return manager, manager, nil}

但是，有一点很重要，NewManager不但返回evictionManager对象，还返回了一个lifecycle.PodAdmitHandler实例evictionAdmitHandler，它其实和evictionManager的内容相同，但是不同的两个实例。evictionAdmitHandler用来kubelet创建Pod前进行准入检查，满足条件后才会继续创建Pod，通过Admit(attrs *lifecycle.PodAdmitAttributes)方法来检查，代码如下：

pkg/kubelet/eviction/eviction_manager.go:102// Admit rejects a pod if its not safe to admit for node stability.func (m *managerImpl) Admit(attrs *lifecycle.PodAdmitAttributes) lifecycle.PodAdmitResult {        m.RLock()        defer m.RUnlock()        if len(m.nodeConditions) == 0 {                return lifecycle.PodAdmitResult{Admit: true}        }        // the node has memory pressure, admit if not best-effort        if hasNodeCondition(m.nodeConditions, v1.NodeMemoryPressure) {                notBestEffort := qos.BestEffort != qos.GetPodQOS(attrs.Pod)                if notBestEffort || kubepod.IsCriticalPod(attrs.Pod) {                        return lifecycle.PodAdmitResult{Admit: true}                }        }        // reject pods when under memory pressure (if pod is best effort), or if under disk pressure.        glog.Warningf("Failed to admit pod %v - %s", format.Pod(attrs.Pod), "node has conditions: %v", m.nodeConditions)        return lifecycle.PodAdmitResult{                Admit:   false,                Reason:  reason,                Message: fmt.Sprintf(message, m.nodeConditions),        }}

上述Pod Admit逻辑，正是Kubernetes Eviction Manager工作机制分析中Scheduler一节提到的EvictionManager对Pod调度的逻辑影响：

Kubelet会定期的将Node Condition传给kube-apiserver并存于etcd。kube-scheduler watch到Node Condition Pressure之后，会根据以下策略，阻止更多Pods Bind到该Node。

killPodNow的代码，后面再分析。

基本上，这一小节我们把evictionManager是什么以及怎么来的问题搞清楚了。下面我们来看看evictionManager的启动过程。

Kubernetes Eviction Manager的启动

上面分析过，kubelet在启动过程中进行runtime依赖模块的初始化过程中，将evictionManager启动了(kl.evictionManager.Start(kl, kl.getActivePods, evictionMonitoringPeriod)),那我们先来看看Start方法：

pkg/kubelet/eviction/eviction_manager.go:126// Start starts the control loop to observe and response to low compute resources.func (m *managerImpl) Start(diskInfoProvider DiskInfoProvider, podFunc ActivePodsFunc, monitoringInterval time.Duration) error {        // start the eviction manager monitoring        go wait.Until(func() { m.synchronize(diskInfoProvider, podFunc) }, monitoringInterval, wait.NeverStop)        return nil}

很简单，启动一个goroutine，每执行完一次m.synchronize就间隔monitoringInterval(10s)的时间再次执行m.synchronize，如此反复。

接下来，就是evictionManager的关键工作流程了：

pkg/kubelet/eviction/eviction_manager.go:181// synchronize is the main control loop that enforces eviction thresholds.func (m *managerImpl) synchronize(diskInfoProvider DiskInfoProvider, podFunc ActivePodsFunc) {        // if we have nothing to do, just return        thresholds := m.config.Thresholds        if len(thresholds) == 0 {                return        }        // build the ranking functions (if not yet known)        if len(m.resourceToRankFunc) == 0 || len(m.resourceToNodeReclaimFuncs) == 0 {                // this may error if cadvisor has yet to complete housekeeping, so we will just try again in next pass.                hasDedicatedImageFs, err := diskInfoProvider.HasDedicatedImageFs()                if err != nil {                        return                }                m.resourceToRankFunc = buildResourceToRankFunc(hasDedicatedImageFs)                m.resourceToNodeReclaimFuncs = buildResourceToNodeReclaimFuncs(m.imageGC, hasDedicatedImageFs)        }        // make observations and get a function to derive pod usage stats relative to those observations.        observations, statsFunc, err := makeSignalObservations(m.summaryProvider)        if err != nil {                glog.Errorf("eviction manager: unexpected err: %v", err)                return        }        // attempt to create a threshold notifier to improve eviction response time        if m.config.KernelMemcgNotification && !m.notifiersInitialized {                glog.Infof("eviction manager attempting to integrate with kernel memcg notification api")                m.notifiersInitialized = true                // start soft memory notification                err = startMemoryThresholdNotifier(m.config.Thresholds, observations, false, func(desc string) {                        glog.Infof("soft memory eviction threshold crossed at %s", desc)                        // TODO wait grace period for soft memory limit                        m.synchronize(diskInfoProvider, podFunc)                })                if err != nil {                        glog.Warningf("eviction manager: failed to create hard memory threshold notifier: %v", err)                }                // start hard memory notification                err = startMemoryThresholdNotifier(m.config.Thresholds, observations, true, func(desc string) {                        glog.Infof("hard memory eviction threshold crossed at %s", desc)                        m.synchronize(diskInfoProvider, podFunc)                })                if err != nil {                        glog.Warningf("eviction manager: failed to create soft memory threshold notifier: %v", err)                }        }        // determine the set of thresholds met independent of grace period        thresholds = thresholdsMet(thresholds, observations, false)        // determine the set of thresholds previously met that have not yet satisfied the associated min-reclaim        if len(m.thresholdsMet) > 0 {                thresholdsNotYetResolved := thresholdsMet(m.thresholdsMet, observations, true)                thresholds = mergeThresholds(thresholds, thresholdsNotYetResolved)        }        // determine the set of thresholds whose stats have been updated since the last sync        thresholds = thresholdsUpdatedStats(thresholds, observations, m.lastObservations)        // track when a threshold was first observed        now := m.clock.Now()        thresholdsFirstObservedAt := thresholdsFirstObservedAt(thresholds, m.thresholdsFirstObservedAt, now)        // the set of node conditions that are triggered by currently observed thresholds        nodeConditions := nodeConditions(thresholds)        // track when a node condition was last observed        nodeConditionsLastObservedAt := nodeConditionsLastObservedAt(nodeConditions, m.nodeConditionsLastObservedAt, now)        // node conditions report true if it has been observed within the transition period window        nodeConditions = nodeConditionsObservedSince(nodeConditionsLastObservedAt, m.config.PressureTransitionPeriod, now)        // determine the set of thresholds we need to drive eviction behavior (i.e. all grace periods are met)        thresholds = thresholdsMetGracePeriod(thresholdsFirstObservedAt, now)        // update internal state        m.Lock()        m.nodeConditions = nodeConditions        m.thresholdsFirstObservedAt = thresholdsFirstObservedAt        m.nodeConditionsLastObservedAt = nodeConditionsLastObservedAt        m.thresholdsMet = thresholds        m.lastObservations = observations        m.Unlock()        // determine the set of resources under starvation        starvedResources := getStarvedResources(thresholds)        if len(starvedResources) == 0 {                glog.V(3).Infof("eviction manager: no resources are starved")                return        }        // rank the resources to reclaim by eviction priority        sort.Sort(byEvictionPriority(starvedResources))        resourceToReclaim := starvedResources[0]        glog.Warningf("eviction manager: attempting to reclaim %v", resourceToReclaim)        // determine if this is a soft or hard eviction associated with the resource        softEviction := isSoftEvictionThresholds(thresholds, resourceToReclaim)        // record an event about the resources we are now attempting to reclaim via eviction        m.recorder.Eventf(m.nodeRef, v1.EventTypeWarning, "EvictionThresholdMet", "Attempting to reclaim %s", resourceToReclaim)        // check if there are node-level resources we can reclaim to reduce pressure before evicting end-user pods.        if m.reclaimNodeLevelResources(resourceToReclaim, observations) {                glog.Infof("eviction manager: able to reduce %v pressure without evicting pods.", resourceToReclaim)                return        }        glog.Infof("eviction manager: must evict pod(s) to reclaim %v", resourceToReclaim)        // rank the pods for eviction        rank, ok := m.resourceToRankFunc[resourceToReclaim]        if !ok {                glog.Errorf("eviction manager: no ranking function for resource %s", resourceToReclaim)                return        }        // the only candidates viable for eviction are those pods that had anything running.        activePods := podFunc()        if len(activePods) == 0 {                glog.Errorf("eviction manager: eviction thresholds have been met, but no pods are active to evict")                return        }        // rank the running pods for eviction for the specified resource        rank(activePods, statsFunc)        glog.Infof("eviction manager: pods ranked for eviction: %s", format.Pods(activePods))        // we kill at most a single pod during each eviction interval        for i := range activePods {                pod := activePods[i]                status := v1.PodStatus{                        Phase:   v1.PodFailed,                        Message: fmt.Sprintf(message, resourceToReclaim),                        Reason:  reason,                }                // record that we are evicting the pod                m.recorder.Eventf(pod, v1.EventTypeWarning, reason, fmt.Sprintf(message, resourceToReclaim))                gracePeriodOverride := int64(0)                if softEviction {                        gracePeriodOverride = m.config.MaxPodGracePeriodSeconds                }                // this is a blocking call and should only return when the pod and its containers are killed.                err := m.killPodFunc(pod, status, &gracePeriodOverride)                if err != nil {                        glog.Infof("eviction manager: pod %s failed to evict %v", format.Pod(pod), err)                        continue                }                // success, so we return until the next housekeeping interval                glog.Infof("eviction manager: pod %s evicted successfully", format.Pod(pod))                return        }        glog.Infof("eviction manager: unable to evict any pods from the node")}

代码写的非常工整，注释也很到位，很棒。关键流程如下：

• 通过buildResourceToRankFunc和buildResourceToNodeReclaimFuncs分别注册Evict Pod时各种Resource的排名函数和回收Node Resource的Reclaim函数。

• 通过makeSignalObservations从cAdvisor中获取Eviction Signal Observation和Pod的StatsFunc(后续对Pods进行Rank时需要用)。

• 如果kubelet配置了--experimental-kernel-memcg-notification且为true，则通过startMemoryThresholdNotifier启动soft & hard memory notification，当system usage第一时间达到soft & hard memory thresholds时，会立刻通知kubelet，并触发evictionManager.synchronize进行资源回收的流程。这样提高了eviction的实时性。

• 根据从cAdvisor数据计算得到的Observation（observasions）和配置的thresholds通过thresholdsMet计算得到此次Met的thresholds。

• 再根据从cAdvisor数据计算得到的Observation（observasions）和thresholdsMet通过thresholdsMet计算得到已记录但还没解决的thresholds，然后与上一步中的thresholds进行合并。

• 根据lastObservations中Signal的时间，对比observasions的中Signal中的时间，过滤thresholds。

• 更新thresholdsFirstObservedAt, nodeConditions。

• 过滤出那些从observed time到now，已经历过grace period时间的thresholds。

• 更新evictionManager对象的内部数据: nodeConditions，thresholdsFirstObservedAt，nodeConditionsLastObservedAt，thresholds，observations。

• 根据thresholds得到starvedResources，并进行排序，如果memory属于starvedResources，则memory排序第一。

• 取starvedResources排第一的Resource，调用reclaimNodeLevelResources对Node上这种Resource进行资源回收。如果回收完后，available满足thresholdValue+evictionMinimumReclaim,则流程结束，不再evict user-pods。

• 如果reclaimNodeLevelResources后，还不足以达到要求，则会继续evict user-pods，首先根据前面buildResourceToRankFunc注册的方法对所有active Pods进行排序。

• 按照前面的排序，顺序的调用killPodNow将选出的pod干掉。如果kill某个pod失败，则会跳过这个pod，再按顺序挑下一个pod进行kill。只要某个pod kill成功，就返回结束，也就是说这个流程中，最多只会kill最多一个Pod。

上面流程中，有两个最关键的步骤，回收节点资源(reclaimNodeLevelResources)和evict user-pods(killPodNow)。

pkg/kubelet/eviction/eviction_manager.go:340// reclaimNodeLevelResources attempts to reclaim node level resources.  returns true if thresholds were satisfied and no pod eviction is required.func (m *managerImpl) reclaimNodeLevelResources(resourceToReclaim v1.ResourceName, observations signalObservations) bool {        nodeReclaimFuncs := m.resourceToNodeReclaimFuncs[resourceToReclaim]        for _, nodeReclaimFunc := range nodeReclaimFuncs {                // attempt to reclaim the pressured resource.                reclaimed, err := nodeReclaimFunc()                if err == nil {                        // update our local observations based on the amount reported to have been reclaimed.                        // note: this is optimistic, other things could have been still consuming the pressured resource in the interim.                        signal := resourceToSignal[resourceToReclaim]                        value, ok := observations[signal]                        if !ok {                                glog.Errorf("eviction manager: unable to find value associated with signal %v", signal)                                continue                        }                        value.available.Add(*reclaimed)                        // evaluate all current thresholds to see if with adjusted observations, we think we have met min reclaim goals                        if len(thresholdsMet(m.thresholdsMet, observations, true)) == 0 {                                return true                        }                } else {                        glog.Errorf("eviction manager: unexpected error when attempting to reduce %v pressure: %v", resourceToReclaim, err)                }        }        return false}pkg/kubelet/pod_workers.go:283// killPodNow returns a KillPodFunc that can be used to kill a pod.// It is intended to be injected into other modules that need to kill a pod.func killPodNow(podWorkers PodWorkers, recorder record.EventRecorder) eviction.KillPodFunc {        return func(pod *v1.Pod, status v1.PodStatus, gracePeriodOverride *int64) error {                // determine the grace period to use when killing the pod                gracePeriod := int64(0)                if gracePeriodOverride != nil {                        gracePeriod = *gracePeriodOverride                } else if pod.Spec.TerminationGracePeriodSeconds != nil {                        gracePeriod = *pod.Spec.TerminationGracePeriodSeconds                }                // we timeout and return an error if we don't get a callback within a reasonable time.                // the default timeout is relative to the grace period (we settle on 2s to wait for kubelet->runtime traffic to complete in sigkill)                timeout := int64(gracePeriod + (gracePeriod / 2))                minTimeout := int64(2)                if timeout < minTimeout {                        timeout = minTimeout                }                timeoutDuration := time.Duration(timeout) * time.Second                // open a channel we block against until we get a result                type response struct {                        err error                }                ch := make(chan response)                podWorkers.UpdatePod(&UpdatePodOptions{                        Pod:        pod,                        UpdateType: kubetypes.SyncPodKill,                        OnCompleteFunc: func(err error) {                                ch <- response{err: err}                        },                        KillPodOptions: &KillPodOptions{                                PodStatusFunc: func(p *v1.Pod, podStatus *kubecontainer.PodStatus) v1.PodStatus {                                        return status                                },                                PodTerminationGracePeriodSecondsOverride: gracePeriodOverride,                        },                })                // wait for either a response, or a timeout                select {                case r := <-ch:                        return r.err                case <-time.After(timeoutDuration):                        recorder.Eventf(pod, v1.EventTypeWarning, events.ExceededGracePeriod, "Container runtime did not kill the pod within specified grace period.")                        return fmt.Errorf("timeout waiting to kill pod")                }        }}

讲到这里，整个evictionManager的主要流程都分析完了。

感谢各位的阅读，以上就是"Kubernetes Eviction Manager怎么启动"的内容了，经过本文的学习后，相信大家对Kubernetes Eviction Manager怎么启动这一问题有了更深刻的体会，具体使用情况还需要大家实践验证。这里是，小编将为大家推送更多相关知识点的文章，欢迎关注！