heartbeat+ipvs+keepalived

1.高可用Heartbeat

Server1和server4安装资源包

heartbeat-3.0.4-2.el6.x86_64.rpm

heartbeat-devel-3.0.4-2.el6.x86_64.rpm

heartbeat-libs-3.0.4-2.el6.x86_64.rpm

ldirectord-3.9.5-3.1.x86_64.rpm

yum install -y heartbeat-*

[root@server1 ha.d]# cd /usr/share/doc/heartbeat-3.0.4/

[root@server1 heartbeat-3.0.4]# cp ha.cf authkeys haresources /etc/ha.d/

[root@server1 heartbeat-3.0.4]# cd /etc/ha.d

[root@server1 ha.d]# vim ha.cf

[root@server1 ha.d]# vim authkeys

[root@server1 ha.d]# chmod 600 authkeys

[root@server1 ha.d]# vim haresources

[root@server1 ha.d]# scp ha.cf authkeys haresources server4:/etc/ha.d

[root@server1 ha.d]# /etc/init.d/heartbeat start

Server4做相同的操作

[root@server4 ha.d]# /etc/init.d/heartbeat start

测试：

[root@server1 ha.d]# /etc/init.d/heartbeat stop

[root@server1 ha.d]# /etc/init.d/heartbeat start

1.ipvs负载均衡

首先停掉server1和server4上的heartbeat

Server1上的操作,并且server1做调度器

[root@server1 ~]# yum install -y ldirectord-3.9.5-3.1.x86_64.rpm

[root@server1 ~]# cd /usr/share/doc/ldirectord-3.9.5/

[root@server1 ldirectord-3.9.5]# cp ldirectord.cf /etc/ha.d

[root@server1 ~]# yum install -y ipvsadm

[root@server1 ~]# ipvsadm -L

[root@server1 ~]# ipvsadm -C ##清除规则

[root@server1 ~]# ipvsadm -A -t 172.25.6.100:80 -s rr ##rr表示采用轮询调度算法，添加新的虚拟ip

[root@server1 ~]# ip addr add 172.25.6.100/24 dev eth0

[root@server1 ~]# ip addr

[root@server1 ~]# ipvsadm -a -t 172.25.6.100:80 -r 172.25.6.2:80 -g ##添加新规则

[root@server1 ~]# ipvsadm -a -t 172.25.6.100:80 -r 172.25.6.3:80 -g

[root@server1 ~]# /etc/init.d/ipvsadm save ##保存添加的规则

[root@server1 ~]# ipvsadm -L ##显示内核中虚拟服务器列表

[root@server1 ~]# /etc/init.d/httpd restart

Server2上的操作

[root@server2 ~]# ip addr add 172.25.6.100/32 dev eth0

[root@server2 ~]# ip addr

[root@server2 ~]# yum install -y arptables_jf

[root@server2 html]# arptables -A IN -d 172.25.6.100 -j DROP

[root@server2 html]# arptables -A OUT -s 172.25.6.200 -j mangle --mangle-ip-s 172.25.6.2

[root@server2 html]# /etc/init.d/arptables_jf save

[root@server2 html]# /etc/init.d/httpd restart

Server3上的操作

[root@server3 ~]# /etc/init.d/httpd start

[root@server3 ~]# ip addr add 172.25.6.100/32 dev eth0 ##给内网网卡添加ip

[root@server3 ~]# ip addr

[root@server3 ~]# yum install -y arptables_jf

[root@server3 html]# arptables -A IN -d 172.25.6.100 -j DROP ##给这个地址追加策略

[root@server3 html]# arptables -A OUT -s 172.25.6.100 -j mangle --mangle-ip-s 172.25.6.3 ##追加策略，由100源地址跳到3上

[root@server3 ~]# /etc/init.d/arptables_jf save ##保存添加的策略

[root@server3 ~]# /etc/init.d/arptables_jf start

[root@server3 ~]# /etc/init.d/httpd restart

测试：

2.高可用与负载均衡

[root@server1 ~]# yum install -y ldirectord-3.9.5-3.1.x86_64.rpm

[root@server1 ~]# cd /etc/ha.d/

[root@server1 ha.d]# vim ldirectord.cf

[root@server1 ha.d]# ipvsadm -C ##清除策略

[root@server1 ha.d]# ipvsadm -L ##查看策略

[root@server1 ha.d]# ip addr del 172.25.6.100/24 dev eth0 ##删除内网网卡上的ip

[root@server1 ha.d]# vim haresources

[root@server1 ha.d]# scp haresources ldirectord.cf 172.25.6.4:/etc/ha.d/ ##server4上做与server1相同的操作

打开server4上的heartbeat替代server1的heartbeat

[root@server1 html]# /etc/init.d/httpd restart

测试：

如果server2和server3的httpd打开

如果server2和server3 httpd关闭，则访问heartbeat所在的主机

4.keepalived

关闭server1和server4的heartbeat，打开server2和server3的httpd

Server1上的操作

[root@server1 ~]# tar zxf keepalived-1.2.20.tar.gz

[root@server1 ~]#cd keepalived-1.2.20/

[root@server1 keepalived-1.2.20]# ./configure --prefix=/usr/local/keepalived/ ##解译到指定路径

[root@server1 keepalived-1.2.20]# make && make install

[root@server1 keepalived-1.2.20]# cd /usr/local/keepalived/

[root@server1 local]# scp -r keepalived/ 172.25.6.4:/usr/local/

[root@server1 sbin]#

ln -s /usr/local/keepalived/sbin/keepalived /sbin/

[root@server1 etc]# ln -s /usr/local/keepalived/etc/keepalived/ /etc/

[root@server1 sysconfig]#

ln -s /usr/local/keepalived/etc/sysconfig/keepalived /etc/sysconfig/

[root@server1 sysconfig]#

ln -s /usr/local/keepalived/etc/rc.d/init.d/keepalived /etc/init.d/

[root@server1 init.d]# chmod +x keepalived

[root@server1 init.d]# cd /etc/keepalived/

[root@server1 keepalived]# ls

keepalived.conf samples

[root@server1 keepalived]# vim keepalived.conf

[root@server1 keepalived]# /etc/init.d/keepalived start

将修改的配置文件发送到server4同位置

Server4上的操作

[root@server4 keepalived]#

ln -s /usr/local/keepalived/sbin/keepalived /sbin/

[root@server4 keepalived]#

ln -s /usr/local/keepalived/etc/rc.d/init.d/keepalived /etc/init.d

[root@server4 keepalived]#

chmod +x /usr/local/keepalived/etc/rc.d/init.d/keepalived

[root@server4 keepalived]#

ln -s /usr/local/keepalived/etc/sysconfig/keepalived /

etc/sysconfig/

[root@server4 keepalived]# /etc/init.d/keepalived start

[root@server4 keepalived]# mkdir /etc/keepalived/

将文件中的server1改为server4，state改为backup，

两者的virtual_router_id一定不同，server4的priority值小于server1的值

将keepalived进行重启

测试：