ensp单臂路由学习笔记

交换机vlan路由实验--单臂路由方式

网络拓扑图：

路由器上的配置：

system-view

[R]interface Ethernet 0/0/0.1

[R-Ethernet0/0/0.1]dot1q termination vid 10

[R-Ethernet0/0/0.1]ip address 192.168.1.1 255.255.255.0

[R-Ethernet0/0/0.1]q

[R]interface Ethernet 0/0/0.2

[R-Ethernet0/0/0.2]dot1q termination vid 20

[R-Ethernet0/0/0.2]ip address 192.168.2.1 255.255.255.0

[R-Ethernet0/0/0.2]q

[R]display ip interface brief

Interface IP Address/Mask Physical Protocol

Ethernet0/0/0 unassigned up down

Ethernet0/0/0.1 192.168.1.1/24 up up

Ethernet0/0/0.2 192.168.2.1/24 up up

交换机上的配置：

[S]interface GigabitEthernet 0/0/1

[S-GigabitEthernet0/0/1] port link-type trunk

[S-GigabitEthernet0/0/1] port trunk allow-pass vlan 10 20

[S-GigabitEthernet0/0/1]q

[S]interface GigabitEthernet0/0/2

[S-GigabitEthernet0/0/2] port link-type access

[S-GigabitEthernet0/0/2] port default vlan 10

[S-GigabitEthernet0/0/2]q

[S]interface GigabitEthernet 0/0/3

[S-GigabitEthernet0/0/3]port link-type access

[S-GigabitEthernet0/0/3]port default vlan 20

[S-GigabitEthernet0/0/3]q

实验结果验证：PC1和PC2之间可以ping通